'''Node name:''' NodeGriswold<
>
'''Live Date:''' March 12, 2017 <
>
'''Sponsor:''' Mark Wilson and Ellen Burr<
>
'''Contact:''' TedBrunner<
>
1123 SE Harney Street<
>
Portland, OR 97202<
>
## This following macro will only work if you have placed this node on the map.personaltelco.net using the exact same node name as this page title. Uncomment this macro after doing so. See NodeMap for more information.
##<>
=== Network Configuration ===
* Hostname: `tree`
* Device: linksys,e8450-ubi
* OpenWrt: r30963-79d3db74473c
* IPv4: 10.11.13.1/26
* Interface: wlan0
* SSID: "www.personaltelco.net"
* BSSID: D8:EC:5E:8C:F4:29
* Channel: 1
* Interface: wlan1
* SSID: "www.personaltelco.net"
* BSSID: D8:EC:5E:8C:F4:2A
* Channel: 36
* Interface: wlan2
* SSID: "www.personaltelco.net/ap0"
* BSSID: DA:EC:5E:8C:F4:29
* Channel: 1
* Interface: wlan3
* SSID: "www.personaltelco.net/ap0"
* BSSID: DA:EC:5E:8C:F4:2A
* Channel: 36
* Hostname: `ap1`
* Device: meraki,mr24
* OpenWrt: r28332-5a24850de141
* IPv4: 10.11.13.2/26
* Interface: wlan0
* SSID: "www.personaltelco.net"
* BSSID: 88:DC:96:07:A3:5E
* Channel: 1
* Interface: wlan1
* SSID: "www.personaltelco.net"
* BSSID: 88:DC:96:07:AF:91
* Channel: 36
* Interface: wlan2
* SSID: "www.personaltelco.net/ap1"
* BSSID: 8A:DC:96:07:A3:5E
* Channel: 1
* Interface: wlan3
* SSID: "www.personaltelco.net/ap1"
* BSSID: 8A:DC:96:07:AF:91
* Channel: 36
* Hostname: `ap2`
* Device: meraki,mr24
* OpenWrt: r28332-5a24850de141
* IPv4: 10.11.13.3/26
* Interface: wlan0
* SSID: "www.personaltelco.net"
* BSSID: 00:02:6F:E1:01:19
* Channel: 6
* Interface: wlan1
* SSID: "www.personaltelco.net"
* BSSID: 00:02:6F:E0:F4:2F
* Channel: 44
* Interface: wlan2
* SSID: "www.personaltelco.net/ap2"
* BSSID: 02:02:6F:E1:01:19
* Channel: 6
* Interface: wlan3
* SSID: "www.personaltelco.net/ap2"
* BSSID: 02:02:6F:E0:F4:2F
* Channel: 44
=== Installers / Organizers ===
* TedBrunner
* TomasKuchta
* RussellSenior
=== Maintenance and System Log ===
* 2025-09-06: RussellSenior and TedBrunner stopped by to replace the gateway device to try to correct ap1 ethernet link flapping. Tested the ethernet run to ap1, tested good. The ap1 MR24 is powered over ethernet.
* 2017-03-12: Initial installation, need to return to finish terminating ethernet.
=== Notes ===
* Primary function for node host was to extend wifi coverage to an ADU
* Ran ethernet from office to multiple house locations
----
[CategoryNode][CategoryPersonalTelco]